btk autoinstall

[BarbaNegra]

...

Please login to view full content. Log in or register now.

 

[avgan]

hi
i looking in every corner of this forum + another 1000 foruns but i cannot find the auto install commands to install btk server on the dm500s(just for test my self)
i find in this house this commands:
wget http://cccamdb.com/btk/getbtke1.sh
sh getbtke1.sh
---------------------
but after the first command i get this message:
~ > wget http://cccamdb.com/btk/getbtke1.sh
wget: getbtke1.sh: Read-only file system
----------------------

any ideia?????should this commands are wrong?i have to install gemini 9image first?please,all help or ideias are welcome.....
i have installed already the image gemini 4.2.0...but is the same result with the commands.
thanks in advance

I sent you the file to your device install Dm 500

Copy this file tmp
> addons-->manuel install setup

Follow this path to the image gemini dm500 s

 

[BarbaNegra]

hi
i looking in every corner of this forum + another 1000 foruns but i cannot find the auto install commands to install btk server on the dm500s(just for test my self)
i find in this house this commands:
wget http://cccamdb.com/btk/getbtke1.sh
sh getbtke1.sh
---------------------
but after the first command i get this message:
~ > wget http://cccamdb.com/btk/getbtke1.sh
wget: getbtke1.sh: Read-only file system
----------------------

any ideia?????should this commands are wrong?i have to install gemini 9image first?please,all help or ideias are welcome.....
i have installed already the image gemini 4.2.0...but is the same result with the commands.
thanks in advance

I sent you the file to your device install Dm 500

Copy this file tmp
> addons-->manuel install setup

Follow this path to the image gemini dm500 s

I try this before and i put this file on the dm500 but when i restart the box comes camd-id not found....But i gona do again and i post in few minutes....
thanks

 

[bebelusul]

RO: vezi ca ala era scriptul pt btkclient legat la vechiul server care l-am inchis!

EN: those were for the old server witch is closed

 

[BarbaNegra]

RO: vezi ca ala era scriptul pt btkclient legat la vechiul server care l-am inchis!

EN: those were for the old server witch is closed

thanks bebelusul
can you explain how is the best way to make a btk server on dm500s just for i can see how it work???have any tutotrial to explain how to do???
thanks in advance.

 

[BarbaNegra]

HI
I think everything is done,but i get stuck on login:s:s:s:s
where i find the username to login?????
this is after i setup everything(hope everything is ok):
----------------------------------------------------
# This CFG has been created by BtkPHP - BillyTK
# Just copy & paste into your dcwserver.cfg

Debug: 1
Port: 2000
SKey: 1122334455667788
UKey: root
MaxC: 1000
Cver: 077
Tcfg: 2003 kym
Tout: 10000
EcmC: 2
Stack: 64

# ------ Lines ---------
C: xxx.xxxxxxx.xx 2000 test test

# ------ Users ---------

HELP PLEASE...

 

[bebelusul]

RO: vezi ca ala era scriptul pt btkclient legat la vechiul server care l-am inchis!

EN: those were for the old server witch is closed

thanks bebelusul
can you explain how is the best way to make a btk server on dm500s just for i can see how it work???have any tutotrial to explain how to do???
thanks in advance.

put all files in same dir.
/usr/btk for example.
btkserver_ppc and dcw...config
edit cfg file and run the server....
merge bine daca ai linii bune.

 

[BarbaNegra]

hi
thanks for your help but i get stuck again,i change the values but for some reason i cannot connect to the server .
i try:
192.168.x.xxx:kym
192.168.x.xxx:2003
192.168.x.xxx:2000
192.168.x.xxx::3541
even with the default webpass: billy, but no luck at all,
When i try with WINSCP Telnet program,ask me for a username witch i no have clue what it is.
I leave here the way i have my dm500:
for dm500s ip on the router i have this ports open: 3541,2000,2003
---------------------------------------------------
var/home/btk/btkmon.cfg
# www.btksoft.com by BillyTK
# btkmon.cfg is commonly used by btktrap and btkmon applications

#Debug: 1 / 0 - enable disable debug
Debug: 0

#Time: XX checks processes defined in Proc: every XX seconds
Time: 30

#Load: defines preloader Application like btktrap_xx.so
Load: /var/bin/btktrap_ppc.so

#Kill: defines the kill application for processes.. default is "killall"
Kill: killall

# Proc: restarts the application if fails/crashes or after timeout defined.
# Proc: [directory] [Application] [Mode] [Restart Timeout]
# [Mode] defines if preloader is neded or not 0: normal run ----- 1 : Loads application with preloader defined in Load:

#examples
# Below line will restart btksrv if crashes and/or restarts the btkserver everyday (86400 sec = 1 day)
Proc: /var/bin/ btksrv_mips 0 86400

# Below line will restart the btkcam on crash. No timeout restart.
Proc: /var/bin/ btkcam_mips 0 0

# Below line will restart the CCcam on crash with preload. No timeout restart.
Proc: /var/bin/ CCcam2.1.4 1 0

#WebPass: Web interface Password - if not defined default password is billy
WebPass: kym

#Port: Http Port for web interface. If not defined default port is 3541
Port: 3541


#BTKTRAP Parameters

#S: defines btkserver that dcws will be sent. When btktrap captures a DCW, uses S: lines to send DCWs
#S: [Host/IP] [Port] [UKey]
S: 192.168.10.10 1453 abcdef

# E1pass: root password of Dreambox. Required for only enigma1 devices.
E1pass: dreambox
--------------------------------------------------------------------
# This CFG has been created by BtkPHP - BillyTK
# Just copy & paste into your dcwserver.cfg

Debug: 1
Port: 2000
SKey: A,B,C,D,E,F,0,1,2,3,4,5,6,7,8,9
UKey: root
MaxC: 1000
Cver: 077
Tcfg: 2003 kym
Tout: 10000
EcmC: 1
Stack: 64

# ------ Lines ---------
N: 192.168.x.xxx 15000 test test 0102030405060708091011121314

# ------ Users ---------
U: btk btk 1