MultiCS & CSP & OScam Exchange Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

BtkCam - BtkServer Stable Releases



Status
Not open for further replies.

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
VFL said:
good how will working btksrv btkmon and php sould be allin one dictinary or spereate?

Hi,

btkphp1.50 , btkmon1.50 and btksrv_196 are compatible with each other.
This is a web based btkserver managemnt method. You may check my website for installation and setup.

But i would recommend you to use BtkMon2.x and btkserver196.
Btkmon2.x has web interface to control Btkmon and cfg files of btkservers.
there are html examples for btkmon in zip package. you ay customize them all easily.

i will upload btkmon2x to my web site with html examples.
for simple config, keep btkmon and btkserver in the same folder. and start them usim btkmon2x

Browse: www.btksoft.com/downloads
thanks
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
Following link Contains examples and some security updates for btkmon2x.

http://www.skystar.org/comment.php?dlid=6033&ENGINEsessID=1e7c66fdeea5e1fd3b63ac5063b100a2

Btkmon2x_ fix2 has a better security and browser compatibility. II guess all files are secure.

Also there are example html.files in zip.

Basically.

if you have a .txt .cfg file for configuration like btkmon.cfg and dcwserver.cfg ,
then you may create a btkmon.cfg.html / dcwserver.cfg.html Forms (like example) to change configuration file

Everything is variable based.
Btkmon2x reads name="Debug:" like definitions in your html and updates them with values defined in any .cfg file.

good luck.
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
New BtkSoft Server and Btkmon2x releases.

BtkServer 197 with CSP
- Requires tracker.cfg file.
- If you dont have Peers then delete tracker.cfg

Btkmon2x release 2.01
- Minor fixes for Multithreading.
- Example cfg and html files are prepared.

Also there is an Readme / Benioku file that describes easy configuration for btkmon2x and btkserver configuration.

Also in the 1st message

http://www.skystar.org/comment.php?dlid=6039&ENGINEsessID=1328ddb2fb5866b6898010275b698a2d
 

z3u5

MultiCS Beta Tester
Member
Joined
Jun 26, 2012
Messages
312
Reaction score
46
Points
28
I connected BTK to my MCS cache... does it work well?
 

z3u5

MultiCS Beta Tester
Member
Joined
Jun 26, 2012
Messages
312
Reaction score
46
Points
28
------------ Ecm Statistics ----------
Active User Count : 3
Ecm Sent Total : 10984
Ecm Sent OK : 10984 %100
Ecm Sent NotOk : 0 %0
Ecm Sent Cache : 16 %0


with BTK connected to MCS cache very few hits on MCS cache
but... 100% success hits :D
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
On btk server there is a different mechanism.

When Btkserver gets an ecm query.
1. Checks local btkserver cache
2. Forwards/asks CSP cache
3. Forwards N / C lines
4. if C/N Responds with NOk then checks local cache and CSP cache

Simply when a ECM query received it is forwarded to CSP cache peers. Btkserver waits 3 seconds to receive DCW from CSP cache.

Try removing all your C: and N: lines and only enable CSP tracker. You will see if it works.
 

z3u5

MultiCS Beta Tester
Member
Joined
Jun 26, 2012
Messages
312
Reaction score
46
Points
28
but cache is supposed to work the opposite side
to avoid card access

1st cache of btk
2nd cache of tracker
3rd N and C lines
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
No cam-server works like that... All Servers checks the cache first and only 1st ecm is sent to Card... but they never wait for the csp cache to reply, before sending it to card. Because it causes extreme delays to the responses.

Theory:
Because only 1st ECM is sent to card, All the other queries stays in a 3 second wait state to receive either card response from local cache or CSP cache . This is (usually) how they work...

If you think about only the 1st ECM query, it is always destined to Card. If you dont get a response then it waits up to 3 sec to get CSP response. As you know CSP may send to other peers if it does not has the DCW.

I guess i made it clear.
 

bebelusul

Cache Master Blaster!
V.I.P Member
Joined
Jun 30, 2012
Messages
923
Reaction score
403
Points
113
true..but i think multics first check the cache(this is why we get a big ecm time)
not sure about csp....
anyway nice work with btk
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
I agree. 1st ECM is always checked with btk-cache and CSP cache. After that, it is sent to card eventually.
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
New Releases are on the 1st message

http://www.skystar.org/comment.php?dlid=6082&ENGINEsessID=6d69b58075424f328843a09d472c27c2
Btksrv2.00
Btkmon 202
Btkcam 082

Also source code of btkcam 082 is public on my site.
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
Latest Stable Releases.

Btkcam 0.83
- At least %30 faster. binary is much smaller. extremely optimized
- biss.cfg format is changed. DB format is not supported anymore. Only B2: format is active.
- Mode: is added to btkcam.cfg- check for details. 1- DCW proto 2-ECM proto 3-Both.
- PMT fix.

Btkserver 2.10
- Shorter binary. faster processing.
- biss support removed from server side
- Dm500 C: line error is fixed.

BtkMon 2.04
- Some fixes.

http://skystar.org/comment.php?dlid=6251&ENGINEsessID=05a9a96527f0a99db9b7ed1866928fc8


You may see all source and latest binaries at btksoft.com
 

bebelusul

Cache Master Blaster!
V.I.P Member
Joined
Jun 30, 2012
Messages
923
Reaction score
403
Points
113
tested..but takes ages to clear a channel after i change channel...
doesn`t read C/N from multics...works ok with C from oscam

and for client...dcw and ecm mode? wtf means? i used option 3
 

oentie

Active Member
Member
Joined
Jul 8, 2012
Messages
392
Reaction score
83
Points
28
Tested too channel changing ok but
But it does not read clines
For the rest i think its better then the previous versions
 

billytk

New Member
Member
Joined
Jul 10, 2012
Messages
37
Reaction score
0
Points
0
Latest btkcam 084 version is out
Code:
skystar.org/comment.php?dlid=6259&ENGINEsessID=05a9a96527f0a99db9b7ed1866928fc8

- Internal Emu support added... Irdeto2
- JSC and bulsat I2 are OK
- requires latest SoftCam.Key in /var/keys folder
- requires openssl library.
Code:
skystar.org/comment.php?dlid=5665&ENGINEsessID=0449b988c95cfbd88f40876e549b8f5b

Btkserver 210 is here
Code:
skystar.org/comment.php?dlid=6251&ENGINEsessID=fba970379f59c108a2e58923224f484e
- C: line fixed for Enigma1 Dm500 devices
- Faster processing.


----
Bebelusul :
Mode: in btkcam.cfg defines active protocols in btkcam.
if you select
Mode: 1 then only DCW query protocol is active
Mode: 2 then only ECM query protocol is active. (If there is no DCW sharing this runs faster..)
Mode: 3 means both protocols are active. Firstly DCW protocol then ECM protocol is used by btkcam.

Also i have no plans to add C: protocol in btkcam client..
Only Btkserver will support that.

Finally,
In a few days i will add VIA internal emu. (i hope)
 

bebelusul

Cache Master Blaster!
V.I.P Member
Joined
Jun 30, 2012
Messages
923
Reaction score
403
Points
113
Tested..works ok...even on NDS with cam84 beta(just 1,2 freezes in 30 min for PrimaF*** an i don`t have a card)
Still tryed btktrap on dm500 and got seg fault....i will try again on another box...
But this server+cam are OK.
For me are stable
 

drmacsoft

Active Member
Member
Joined
Aug 20, 2012
Messages
170
Reaction score
42
Points
28
surfing and google many days to understand how to config or how it works as an emu. it is great and who ever dont use it looses many. Billy if possible make complete guide of usage of btcam and dcwserver config files what do now support and what are their usage.. And if u have time add me on your contacts on skype(same name as nickname here) to talk a bit more about it..


regards
 

oentie

Active Member
Member
Joined
Jul 8, 2012
Messages
392
Reaction score
83
Points
28
I like this cam and server too but it looks a bit like billy is on a bredak or hollyday on other forums its also silent around btcam

Gr oentie
 

ramizisia

New Member
Member
Joined
Jul 5, 2013
Messages
2
Reaction score
0
Points
0
my friends billytk how are you, in my gemini.4.70 is btkcam0.85 but not cfg.do you have cfg komplete for me dear billytk admin.thanks for understand.
 
Status
Not open for further replies.


Top
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.